
Equipment Depreciation Schedules and Useful Life: A Guide for Business Owners (2026 Tax Year)
Key takeaways
An equipment depreciation schedule lists each machine’s cost, placed-in-service date, MACRS class, and recovery period, then the share of its cost recovered each year, using the IRS percentage tables in Publication 946 for tax year 2026.
- Much of a business’s equipment is 5-year or 7-year property, but the activity it serves can change the class.
- Placed in service starts the clock. Delivery doesn’t.
- Under the half-year convention, a 5-year schedule runs across six tax returns.
- Property that has to use ADS can’t take the special depreciation allowance at all.
- On a true lease, the machine sits on the lessor’s schedule, not yours.
The PDF of IRS Publication 946 runs to 113 pages. Most owners need two of its tables. One tells you how long a machine depreciates, the other how much of its cost comes off each year, and together they make an equipment depreciation schedule.
The first-year elections belong to our page on the Section 179 deduction for equipment. This guide is about everything after that. The years. The classes. The machine you sell in year four.
A word on where this comes from. Paramount Financial finances and leases equipment, and a depreciation schedule exists whether a machine was bought with cash, financed, or leased from someone else. Everything here is educational, the figures come from the IRS pages linked below for tax year 2026, and you should consult your tax advisor before acting on any of it.
What an Equipment Depreciation Schedule Records
An equipment depreciation schedule is the running record of how a business recovers the cost of each machine it owns. For every asset it lists cost or other basis, the placed-in-service date, the MACRS property class, the method and convention, the recovery period, and each year’s amount until the cost is recovered.
That’s the whole idea. MACRS, the Modified Accelerated Cost Recovery System, sets the classes. The class is the hard part.
The clock starts when the equipment is placed in service, which Publication 946 defines as “ready and available for a specific use.” It stops when the cost is fully recovered or the machine is retired from service, whichever comes first. Land never goes on the schedule, because land doesn’t wear out. Neither does a machine bought and sold in the same year.
Useful Life, Class Life, and Recovery Period
Three different numbers get called a machine’s useful life. They aren’t the same number, and mixing them up is how a schedule goes wrong in year one.
The first is a test, not a span. Publication 946 says depreciable property “must have a determinable useful life,” meaning it wears out, decays, gets used up, becomes obsolete, or loses value from natural causes. A compact excavator passes. So does a server rack. The test decides whether something can be depreciated at all, and says nothing about how long.
We’re simplifying a little here. Not by much. The second number is the class life, which Appendix B gives every asset class, and a desk’s is 10. The third is the recovery period, and that’s the one your return actually runs on, set by the class and by the system, either the General Depreciation System (GDS), which is the default, or the Alternative Depreciation System (ADS), which applies when the law requires it or you elect it. Under GDS, the same desk is 7-year property. Your accountant may keep a fourth number for the financial statements.
Fair warning: the next part is a table, and it’s dry. We read it from Appendix B of Publication 946 (2025) on November 14, 2026. All figures in years.
| Asset class | Class life | GDS | ADS |
|---|---|---|---|
| 00.11 Office furniture and fixtures | 10 | 7 | 10 |
| 00.12 Computers and peripherals | 6 | 5 | 5 |
| 00.242 Heavy general purpose trucks | 6 | 5 | 6 |
| 15.0 Construction | 6 | 5 | 6 |
| 57.0 Retail and service trades | 9 | 5 | 9 |
| Not in either table | None | 7 | 12 |

How to Find a Machine’s Recovery Period
Two tables, read in order. Publication 946 says you’ll “need to look at both Table B-1 and Table B-2,” with B-1 sorted by asset and B-2 by activity, from 01.1 Agriculture through construction, manufacturing, and retail. The sequence:
- Find the asset in Table B-1: office furniture, computers, trucks, and the like.
- Find the activity the machine serves in Table B-2, such as construction, agriculture, or retail trade.
- Read the text under that activity. If it specifically includes your asset, use the activity’s recovery period.
- If it doesn’t, go back to the Table B-1 row.
- Listed in neither table? Then it’s generally 7 years under GDS and 12 under ADS.
Three Lookups From Appendix B
- A retail clothing store buys a desk and a cash register, in Example 3 of Appendix B. The desk is class 00.11, 7-year property. The register isn’t in Table B-1, so it falls to the store’s activity, class 57.0 Distributive Trades and Services, with a 9-year class life and a 5-year GDS period.
- Construction machinery sits in class 15.0, which covers assets used by general building, special trade, heavy, and marine contractors, plus operative and investment builders and real estate developers. Class life six, GDS period five.
- Farm machinery splits on who ran it first. New machinery and equipment used in a farming business is 5-year property when the original use begins with you after 2017, and used agricultural machinery is 7-year property, which is worth knowing before you compare a new unit with a used one on a farm equipment purchase.
Same store, two schedules. Same tractor model, two recovery periods.
Reading an Equipment Depreciation Schedule by Year
Table A-1 in Publication 946 gives the share of basis recovered each year for property under the half-year convention, which is the default for most equipment:
| Year | 5-year property | 7-year property |
|---|---|---|
| 1 | 20.00% | 14.29% |
| 2 | 32.00% | 24.49% |
| 3 | 19.20% | 17.49% |
| 4 | 11.52% | 12.49% |
| 5 | 11.52% | 8.93% |
| 6 | 5.76% | 8.92% |
| 7 | None | 8.93% |
| 8 | None | 4.46% |
Count the 5-year column. Six entries.
That’s the half-year convention, under which the IRS treats property placed in service during a tax year as placed in service at the midpoint of that year, so year one gets half a year of depreciation and the last half-year spills over into a sixth return. A 7-year machine runs across eight.
The shape matters too. GDS uses the 200 percent declining balance method for nonfarm 3-, 5-, 7-, and 10-year property, which loads the early years, and the table switches to straight line at the point where straight line gives an equal or larger deduction. You don’t do that math. The table already did. An owner can elect the 150 percent declining balance method or straight line instead, which spreads the cost more evenly.
40%
The mid-quarter test: when more than this share of a tax year’s MACRS depreciable bases is placed in service in the last 3 months of the year, the mid-quarter convention applies to that year’s property.
Source: IRS, Publication 946 (2025), Which Convention Applies?
Year-end buyers trip on this one. Under the mid-quarter tables in Publication 946, 5-year property placed in service in the first quarter recovers 35.00 percent in year one and property placed in service in the fourth quarter recovers 5.00 percent, against 20.00 percent under the half-year convention. That’s a wide gap. A run of December deliveries can change the first-year math for everything bought that year. Ask in October.

Why the Schedule Matters at 100 Percent
For tax year 2026 the special depreciation allowance is 100 percent for qualified property acquired and placed in service after January 19, 2025, according to the IRS’s Topic no. 704, and Section 179 can come before it within the year’s limits. So why bother with a schedule?
Because plenty of equipment never gets first-year treatment, and every machine leaves eventually. Four cases keep the schedule alive:
- Property that must use ADS. Publication 946 is blunt here: if you’re required to use ADS, “you cannot claim any special depreciation allowance” for that property. Listed property used 50% or less for qualified business use is on the list, and so is tangible property used mostly outside the United States.
- A class you elect out of. The election runs class by class, and our bonus depreciation guide covers how it works.
- The books, which never followed the tax schedule anyway.
- The day you sell it.
Who Carries a Financed or Leased Machine
The owner does. Publication 946 says that to claim depreciation, “you must usually be the owner of the property,” and that “you are considered as owning property even if it is subject to a debt.” A machine bought with a loan or an equipment finance agreement generally sits on the borrower’s schedule from the day it’s placed in service.
Leases split.
On a true lease, the lessor generally depreciates the machine and the business deducts its rent instead, which our post on how leased equipment is taxed walks through. The IRS looks past the word “lease” to the incidents of ownership. Publication 946 names five:
- legal title to the property
- the legal obligation to pay for it
- responsibility for maintenance and operating expenses
- the duty to pay any taxes on it
- the risk of loss if it’s destroyed, condemned, or loses value through obsolescence or exhaustion
A $1 buyout lease often reads like a purchase for that reason. A fair market value lease tends to read like a rental. Our comparison of an operating lease vs finance lease covers the structures, and for how Paramount Financial approaches leases, see our equipment leasing page.
One wrinkle from the same chapter. A business that leases a machine can still depreciate capital improvements it makes to that machine, even though the machine itself stays off its schedule.

When the Machine Is Sold
Two rules meet at the sale, one from each publication.
- Retiring a machine from service ends its depreciation, recovered or not (Publication 946, chapter 1).
- Gain on section 1245 property, which takes in depreciable personal property such as most equipment, is treated as ordinary income to the extent of the depreciation “allowed or allowable” on it (Publication 544, 2025).
Read “allowable” twice. Publication 946 defines it as depreciation you’re entitled to deduct, claimed or not. A missing schedule doesn’t shrink it. Pull the schedule before you agree on a sale price, because the remaining basis and the recapture belong in the same conversation as the price itself.
An Equipment Depreciation Schedule for Your Advisor
What to bring.
- The invoice, plus every cost tied to getting the machine running, for your advisor to sort into basis.
- The placed-in-service date. Not the order date.
- What the machine is used for, so the class lookup can start with the activity in Table B-2.
- Business-use percentages for any vehicle that also makes personal trips.
- Which elections were made: Section 179, an election out of the special allowance, 150 percent or straight line.
- The lease or loan agreement. It settles who owns what.
- For anything sold, traded, or scrapped, the date it left.
Form 4562 (2025), Part III, is where MACRS lands: line 19 for property placed in service that year, sorted by class from 19a, and line 17 for assets placed in service in earlier years. Your advisor does the rest.
What Owners Ask About Depreciation Schedules
Is all business equipment depreciated over five years?
Plenty of it is, not all, so check the class in Appendix B of Publication 946 before you assume five.
- Office furniture and fixtures: 7-year property under GDS.
- Used agricultural machinery, also 7-year.
- Anything with no class life lands at 7 years unless the law puts it in another class.
So what happens when a machine outlasts its recovery period?
Nothing happens to the machine, which keeps working with nothing left to depreciate.
- The deductions stop once its cost or other basis is fully recovered, one of the two end points Publication 946 names.
- The schedule tracks cost. Not wear.
Can a business pick its own useful life for tax purposes?
Not under MACRS, where the recovery period comes from the property’s class and the system, GDS or ADS.
- The owner can elect 150 percent declining balance or straight line in place of 200 percent.
- Or elect ADS.
Does the delivery date start the depreciation clock?
Placed in service starts it, and that can come later than delivery.
- Publication 946’s test is ready and available for a specific use.
- A compressor that sits crated until an electrician wires it in may not meet that test on the day it arrives, so ask your advisor where the line falls.
Operating lease or loan: whose depreciation schedule does the machine go on?
The owner’s, for tax purposes, and title plus the end-of-term option show which one you signed.
- Loan or finance agreement: usually the borrower, since property counts as owned even when it’s subject to a debt.
- True lease: generally the lessor.
Why would the books show a different number than the tax return?
Because they answer different questions.
- The return follows the MACRS class and the IRS percentage tables.
- Financial statements usually spread cost over your accountant’s estimate of how long the machine will really be used, and your accountant reconciles the two.
Next Steps
If a purchase or a lease is on the calendar for tax year 2026, start with your tax advisor and the class the machine falls into. Our page on Section 179 rules for tax year 2026 picks up the first-year side. When you’re ready to look at paying for the machine, visit Paramount Financial’s equipment financing page or start an application. The figures above come from the IRS pages linked in this guide, and they’re for tax year 2026, so consult your tax advisor before you sign anything.